3Com Router 3000 Ethernet Family
Configuration Guide
[3Com-Virtual-Template1] remote address 1.1.1.2
[3Com-Virtual-Template1] quit
# Configure PPPoE Server.
[3Com] interface ethernet 1/0/0
[3Com-Ethernet1/0/0] pppoe-server bind virtual-template 1
2)
Configure 3Com 2
[3Com] dialer-rule 1 ip permit
[3Com] interface dialer 1
[3Com-Dialer1] dialer user 3Com2
[3Com-Dialer1] dialer-group 1
[3Com-Dialer1] dialer bundle 1
[3Com-Dialer1] ip address ppp-negotiate
[3Com-Dialer1] ppp chap user 3Com2
[3Com-Dialer1] ppp chap password simple 3Com
[3Com-Dialer1] quit
[3Com]
3Com
[
-luser-3Com1] password simple 3Com
3Com
[
-luser-3Com1] quit
# Configure a PPPoE session.
[3Com] interface ethernet 1/0/0
[3Com-Ethernet1/0/0] pppoe-client dial-bundle-number 1
2.5.3 Connecting a LAN to the Internet via ADSL Modem
I. Network requirements
PCs on a LAN access the Internet through Router A, which is connected in permanent
on-line mode to the DSLAM through an ADSL modem. The username and password
of the ADSL account are huawei and 123456 respectively. Enable the PPPoE client
function on the router, allowing the hosts on the LAN to access the Internet without
PPPoE client software.
Router B is operating as PPPoE Server. It is connected to the DSLAM through
interface 25M atm2/0/0, providing RADIUS authentication and accounting.
local-user 3Com1
3Com Corporation
2-11
Chapter 2 PPPoE Configuration