Configuring Username And Password - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide

7.2.2 Configuring Username and Password

I. Setting password for password authentication
If you choose password authentication when configuring the authentication mode, you
need to set the password.
Perform the following configuration in user interface view.
Table 7-3 Set password for password authentication
Set
authentication
Cancel
authentication
The keyword simple indicates to configure the password in plain text, while cipher
indicates to configure the password in cipher text.
II. Configuring username and password for local authentication
If you choose local authentication when configuring the authentication mode, you need
to set a username and password.
Table 7-4 Configure username and password for local authentication
Configure a username (in system view)
Remove the user (in system view)
Set a password for the local user (in
local user view)
Cancel the password of the local user (in
local user view)
Where, simple indicates to configure the password in plain text, while cipher indicates
to configure the password in ciphertext.
Then configure the user to adopt local authentication scheme.
Table 7-5 Configure the user in the domain to adopt local authentication scheme
Create an ISP domain or enter the view of an
existing ISP domain (in system view)
Delete a specified ISP domain (in system
view)
Operation
password for
password for
Operation
Operation
3Com Corporation
password set authentication password { cipher |
simple } password
password
undo set authentication password
local-user user-name
undo local-user { user-name | all }
password { cipher | simple } password
undo password
domain
{ disable | enable isp-name } }
undo domain isp-name
7-4
Chapter 7 User Management
Command
Command
Command
{ isp-name | default