Configuring Netbios Ip Address For Dhcp Client - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Table 9-16 Configure DNS IP address in global DHCP address pool
Configures a DNS IP address to DHCP client
Delete the DNS IP address to DHCP client
Perform the following configurations in Ethernet interface (or subinterface) view to
configure interface DHCP address pool.
Table 9-17 Configure DNS IP address in interface DHCP address pool
Configure a DNS IP address to DHCP
client
Delete the DNS IP address to DHCP
client
Perform the following configurations in the system view to configure multiple interface
DHCP address pools.
Table 9-18 Configure DNS IP address in multiple interface DHCP address pools
Add a DNS server to the DNS server list
of the DHCP client
Remove the specified DNS server from
the DNS server list of the DHCP client
By default, no IP address of DNS server is configured.

9.5.8 Configuring NetBIOS IP Address for DHCP Client

For those clients running on Microsoft operating system, WINS (Windows Internet
Naming Service) server is required to translate host name into IP address for the hosts
using NetBIOS protocol. So most Windows client may require WINS settings.
A maximum of eight NetBIOS addresses currently can be configured in a DHCP
address pool.
Perform the following configurations in the DHCP address pool view to configure global
DHCP address pool.
Operation
Operation
Operation
3Com Corporation
9-24
Chapter 9 DHCP Configuration
Command
dns-list ip-address [ ip-address ]
undo dns-list { ip-address | all }
Command
dhcp server dns-list
[ ip-address ]
undo dhcp server dns-list { ip-address |
all }
Command
dhcp server dns-list
[ ip-address ] { interface interface-type
interface-number
interface-number | all }
undo dhcp server dns-list { ip-address
| all } { interface
interface-number
interface-number | all }
ip-address
ip-address
[ to interface-type
interface-type
[ to interface-type