3Com Router 3000 Ethernet Family
Configuration Guide
7.4 Typical Example of User Management
7.4.1 Performing Password Authentication
The user need enter the password 3Com when logging onto the system from the VTY 0
by password authentication. The user priority is 3. The operation commands are shown
as follows:
<3Com> system-view
[3Com] user-interface vty 0
[3Com-ui-vty0] authentication-mode password
[3Com-ui-vty0] set authentication password simple 3Com
[3Com-ui-vty0] user privilege level 3
7.4.2 Performing User Authentication Using the Local User Database
The user need enter the configured username v 2.41 and password 3Com when
logging onto the system from the VTY 0. The operation commands are shown as
follows:
<3Com> system-view
[3Com] user-interface vty 0
[3Com-ui-vty0] authentication-mode scheme
[3Com-ui-vty0] quit
[3Com] local-user v 2.41
[3Com-luser-v 2.41] password simple 3Com
[3Com-luser-v 2.41] service-type telnet
[3Com-luser-v 2.41] level 3
[3Com] domain system
[3Com-isp-system] scheme local
3Com Corporation
7-7
Chapter 7 User Management