Atm E3/T3 Interface Configuration Commands - 3Com 3031 Command Reference Manual

display controller t3
ATM E3/T3 Interface
Configuration
Commands
cable
[3com-T3 1/0/0]using t3
Syntax
display controller t3 interface-number
View
Any view
Parameter
interface-number: CT3 interface number.
Description
Using the display controller t3 command, you can view the state information of a
CT3 interface.
In addition to the state information of the CT3 interface, the command can display
the information of each T1 line on the CT3 interface if the interface is working in
CT3 mode.
Example
Display the information related to the interface T3 1/0/0.
[3com]display controller t3 1/0/0
T3 1/0/0 is down
Description : 3Com Routers, T3 1/0 Interface
Frame-format C-BIT Parity, line code B3ZS, cable 49 feet, clock
slave, loopback not set
Alarm: none
ERROR: 0 BiPolarViolation, 0 EXcessiveZero, 1 FrameError
0 ParityBitError, 0 C-BitParityBitError, 0 FarEndBlockError
Syntax
cable { long | short }
undo cable
View
ATM T3 Interface view
Parameter
long: Long distance mode. Cable length ranges from 151 to 500 meters.
short: Short distance mode. Cable length ranges from 0 to 150 meters.

ATM E3/T3 Interface Configuration Commands

205