Documentation Resources
1.
Before installation, read the Release Notes for this switch product. The Release Notes detail
the platform-specific functionality of the switching, routing, SNMP, configuration,
management, and other packages. In addition, see the following publications:
•
The NETGEAR installation guide for your switch
•
Hardware Installation Guide
•
Software Setup Guide
•
NETGEAR CLI Reference for the Prosafe 7X00 Series Managed Switch. Refer to the
Command Line Reference for information about the command structure. There are
different documents in this series; choose the appropriate one for your product.
-
The Command Line Reference provides information about the CLI commands used
to configure the switch and the stack. The document provides CLI descriptions,
syntax, and default values.
-
The ProSafe Managed Stackable Switch CLI Manual provides information about the
CLI commands used to configure the switch. The document provides CLI
descriptions, syntax, and default values.
Chapter 1. Documentation Resources
1
| 8