Web Interface: Configure An Inter-Area Router - NETGEAR ProSafe GSM5212P Software Administration Manual

Web Interface: Configure an Inter-area Router

1. Enable IP routing globally
a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply to apply the settings.
2. Enable IPv6 unicast globally
a. Select Routing > IPv6 > Basic > Global Configuration. A screen similar to the
following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply to apply the setting.
3. Enable IPv6 address on interface 1/0/9.
358 | Chapter 23. DHCPv6 Server
ProSafe Managed Switch