Acl Mirroring - NETGEAR ProSafe GSM5212P Software Administration Manual

ProSafe Managed Switch
• In the Sequence Number field, enter 1.
c. Click the Unit 1. The ports display.
d. Click the gray box under port 2. A check mark displays in the box.
e. Click Apply to save the settings.

ACL Mirroring

This feature extends the existing port mirroring functionality by allowing you to mirror a
designated traffic stream in an interface using ACL rules. Define an ACL rule matching the
desired traffic with the option mirror to an interface. Any traffic matching this rule will be
copied to the specified mirrored interface.
1/0/1
L2 switch
10.0.0.2
10.0.0.1
workstation
workstation
Figure 17. ACL mirroring
CLI: Configure ACL Mirroring
The script in this section shows how to mirror the traffic stream received from a host in an
interface. These examples mirror the traffic from the host 10.0.0.1 connected to the interface
1/0/1.
Other
network
GSM73xxS
1/0/19
Probing station
Packets from
10.0.0.1 workstation
Packets from
10.0.0.2 workstation
Chapter 10. ACLs | 147