NETGEAR ProSafe GSM5212P Software Administration Manual page 253

ProSafe Managed Switch
a. Select Routing > Basic > IP Configuration. A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Assign IP address 192.168.1.1/24 to the interface 1/0/1.
a. Select Routing > Advanced > IP Interface Configuration. A screen similar to the
following displays.
b. Under IP Interface Configuration, scroll down and select the Interface 1/0/1 check
box. Now 1/0/1 appears in the Interface field at the top.
c. Enter the following information:
• In the IP Address field, enter 192.168.1.1.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
3. Assign IP address 10.100.5.33/24 to interface 1/0/19:
Chapter 15. Security Management | 253