NETGEAR ProSafe GSM5212P Software Administration Manual page 252

2. Use RADIUS to authenticate the dot1x users.
(Netgear Switch) (Config)#aaa authentication dot1x default radius
3. Configure a RADIUS authentication server.
(Netgear Switch) (Config)#radius server host auth 10.100.5.17
4. Configure the shared secret between the RADIUS client and the server.
Netgear Switch) (Config)#radius server key auth 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
5. Set the RADIUS server as a primary server.
(Netgear Switch) (Config)#radius server msgauth 10.100.5.17
(Netgear Switch) (Config)# radius server primary 10.100.5.17
6. Configure an accounting server.
(Netgear Switch) (Config)#radius accounting mode
(Netgear Switch) (Config)#radius server host acct 10.100.5.17
7. Configure the shared secret between the accounting server and the client.
(Netgear Switch) (Config)#radius server key acct 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
Web Interface: Authenticating dot1x Users by a RADIUS Server
1. Enable routing for the switch.
252 | Chapter 15. Security Management
ProSafe Managed Switch