NETGEAR ProSafe GSM5212P Software Administration Manual page 343

ProSafe Managed Switch
3. Here the default maxiumum satagram size is 1400. It can be modified to a value between
200 and 9116 using the command sflow receiver 1 maxdatagram <size>.
(GSM7328S) #show sflow receivers
Receiver Owner
Index String
-------- -------- ---------- ------------ ----- ------------------------------
1 NetMonit 31535988
2
3
4
5
6
7
8
(GSM7328S) #
4. Configure the sampling port sFlow receiver index, sampling rate, and sampling maximum
header size. You need to repeat these for all the ports to be sampled.
(Netgear Switch) (Config)# interface 1/0/1
(Netgear Switch) (Interface 1/0/1)# sflow sampler 1
(Netgear Switch) (Interface 1/0/1)# sflow sampler rate 1024
(Netgear Switch) (Interface 1/0/1)# sflow sampler maxheadersize 64
5. View the sampling port configurations.
(GSM7328S) #show sflow samplers
Sampler
Data Source
-----------
1/0/1
Web Interface: Configure Statistical Packet-based Sampling
with sFlow
1. Configure the sFlow receiver IP address.
a. Select Monitoring > sFlow > Advanced > sFlow Receiver Configuration.
b. Select the 1 check box.
c. In the Receiver Owner field, enter NetMonitor.
d. In the Receiver Timeout field, enter 31536000.
Time out Max Datagram Port
Size
1400
0 1400
0 1400
0 1400
0 1400
0 1400
0 1400
0 1400
Receiver
Index
--------------- -----------------
1
IP Address
6343 192.168.10.2
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
Packet Max Header
Sampling Rate Size
------------------
1024 64
Chapter 20. SNMP | 343