NETGEAR ProSafe GSM5212P Software Administration Manual page 284

b. For DHCP Snooping Mode, select the Enable radio button.
c. Click Apply.
2. Enable DHCP snooping in a VLAN.
a. Select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays.
b. In the VLAN Configuration table, in the VLAN ID list, select 1.
c. In the DHCP Snooping Mode field, select Enable. A screen similar to the following
displays.
d. Click Apply. A screen similar to the following displays.
3. Configure the port through which the DHCP server is reached as trusted. Here interface
1/0/1 is trusted.
284 | Chapter 15. Security Management
ProSafe Managed Switch