NETGEAR ProSafe GSM5212P Software Administration Manual page 261

ProSafe Managed Switch
Make sure that 1/0/12 and 1/0/6 are configured as force authorized before you do this
step; otherwise you cannot access the switch through the Web Interface.
a. Select Security > Port Authentication > Basic > 802.1x Configuration. A screen
similar to the following displays.
b. For Administrative Mode, select the Enable radio button.
c. Click Apply to save settings.
5. Configure the dot1x authentication list.
a. Select Security > Management Security > Authentication List > Dot1x
Authentication List. A screen similar to the following displays.
b. Select the defaultList check box.
c. In the 1 list, select RADIUS.
d. Click Add.
6. Configure the RADIUS authentication server.
Chapter 15. Security Management | 261