NETGEAR ProSafe GSM5212P Software Administration Manual page 498

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. Select Routing > Multicast > Global Configuration. A screen similar to the following

b. For Admin Mode, select the Enable radio button.

c. Click Apply.

Enable DVMRP on the switch.

a. Select Routing > Multicast > DVMRP > Global Configuration. A screen similar to

the following displays.

b. For Admin Mode, select the Enable radio button.

c. Click Apply.

Enable DVMRP on the interface.

Chapter 31. DVMRP

ProSafe Managed Switch