a. Select System > Services > DHCP Server > DHCP Pool Configuration. A screen
similar to the following displays.
b. Under DHCP Pool Configuration, enter the following information:
•
In the Pool Name list, select Create.
•
In the Pool Name field, enter dhcp_server.
•
In the Type of Binding list, select Dynamic.
•
In the Network Number field, enter 10.200.1.0.
•
In the Network Mask field, enter 255.255.255.0. As an alternate, you can enter 24
in the Network Prefix Length field.
Note:
Do not fill in the Network Mask field and Network Prefix Length field
at the same time.
c. Click Add. The pool_dynamic name is now added to the Pool Name drop-down list.
7.
Create a DHCP pool named dhcp_server_second.
464 |
Chapter 29. DHCP L2 Relay and L3 Relay
ProSafe Managed Switch