Configure A Dhcp Reservation - NETGEAR ProSafe GSM5212P Software Administration Manual

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

d. Select System > Services > DHCP Server > DHCP Pool Configuration. A screen

similar to the following displays.

e. Under DHCP Pool Configuration, enter the following information:

In the Pool Name list, select Create.

In the Pool Name field, enter pool_dynamic.

In the Type of Binding list, select Dynamic.

In the Network Number field, enter 192.168.100.0.

In the Network Mask field, enter 255.255.255.0. As an alternate, you can enter 24

in the Network Prefix Length field. Do not fill in both the Network Mask field and

Network Prefix Length fields.

In the Days field, enter 1.

f. Click Add.

The pool_dynamic name is now added to the Pool Name drop-down list.

Configure a DHCP Reservation

The following example shows how to create a DHCP server with an IP address pool that is

makes fixed IP to MAC address assignments. The example is shown as CLI commands and

as a Web interface procedure.

Chapter 22. DHCP Server

ProSafe Managed Switch