Use Acls To Configure Isolated Vlans On A Layer 3 Switch - NETGEAR ProSafe GSM5212P Software Administration Manual

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

c. Click Add.

Create a static route with IP address 192.168.30.0/24:

a. Select Routing > Routing Table > Basic > Route Configuration. A screen similar to

the following displays.

b. Under Configure Routes, make the following selection and enter the following

information:

In the Route Type field, select Static.

In the Network Address field, enter 192.168.30.0.

In the Subnet Mask field, enter 255.255.255.0.

In the Next Hop IP Address field, enter 192.168.200.1.

c. Click Add.

Use ACLs to Configure Isolated VLANs on a Layer 3 Switch

This example shows how to isolate VLANs on a Layer 3 switch by using ACLs. In this

example, PC 1 is in VLAN 24, PC 2 is in VLAN 48, and the server is in VLAN 38. PC 1 and

Chapter 10. ACLs

ProSafe Managed Switch