NETGEAR ProSafe GSM5212P Software Administration Manual page 104

CLI: ip proxy-arp
(Netgear Switch) (Interface 0/24)#ip proxy-arp ?
<cr>
(Netgear Switch) (Interface 0/24)#ip proxy-arp
Web Interface: Configure Proxy ARP on a Port
1. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the
following displays.
2. Under Configuration, scroll down and select the Interface 1/0/3 check box. Now 1/0/3
appears in the Interface field at the top.
3. In the Proxy Arp field, select Enable.
4. Click Apply to save the settings.
104 | Chapter 8. ARP
Press Enter to execute the command.
ProSafe Managed Switch