NETGEAR ProSafe GSM5212P Software Administration Manual page 502

a. Select Routing > Multicast > DVMRP > Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the Interface 1/0/13 and 1/0/20 check boxes.
c. In the Interface Mode field, select Enable.
d. Click Apply to save the settings.
DVMRP on Switch C
1. Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply.
2. Configure 1/0/11 as a routing port and assign an IP address to it.
502 | Chapter 31. DVMRP
ProSafe Managed Switch