NETGEAR ProSafe GSM5212P Software Administration Manual page 450

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. Select Routing > Multicast > Global Configuration. A screen similar to the following

b. For Admin Mode, select the Enable radio button.

c. Click Apply.

Enable PIM-SM globally.

a. Select Routing > Multicast > PIM > Global Configuration. A screen similar to the

following displays.

b. For PIM Protocol Type, select the PIM-SM radio button.

c. For Admin Mode, select the Enable radio button.

d. Click Apply.

Enable PIM-SM on interfaces 1/0/21, 1/0/22, and 1/0/24.

Chapter 28. PIM

ProSafe Managed Switch