External Multicast Router - NETGEAR ProSafe GSM5212P Software Administration Manual

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

ProSafe Managed Switch

Web Interface: Show mac-address-table igmpsnooping

Select Switching > Multicast > IGMP Snooping Table. A screen similar to the following

External Multicast Router

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure the Switch with an External Multicast Router

This example configures the interface as the one the multicast router is attached to. All IGMP

packets snooped by the switch is forwarded to the multicast router reachable from this

(Netgear Switch)(Interface 1/0/3)# set igmp mrouter interface

Chapter 13. IGMP Snooping and Querier