a. Select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar to the
following displays.
b. Select Interface 1/0/13.
c. Enter the following information:
•
In the IPv6 Prefix field, enter 2001:2::1.
•
In the Prefix Length field, enter 64.
•
In the EUI64 field, select Disable.
d. Click Add to save the settings.
6.
Configure the router ID of OSPFv3.
a. Select Routing > OSPFv3 > Basic > OSPFv3 Configuration. A screen similar to the
following displays.
b. In the Router ID field, enter 1.1.1.1.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
7.
Enable OSPFv3 on interfaces 1/0/1 and 1/0/13.
476 |
Chapter 30. MLD
ProSafe Managed Switch