NETGEAR ProSafe GSM5212P Software Administration Manual page 398

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. Select Switching > VLAN > Advanced > Port PVID Configuration. A screen similar

to the following displays.

b. Under PVID Configuration, scroll down and select the Interface 1/0/1 check box.

c. In the PVID (1 to 4093) field, enter 500.

d. Click Apply to save the settings.

Enable IPv6 forwarding and unicast routing on the switch.

a. Select Routing > IPv6 > Basic > Global Configuration. A screen similar to the

following displays.

b. For IPv6 Unicast Routing, select the Enable radio button.

c. For IPv6 Forwarding, select the Enable radio button.

d. Click Apply.

Enable IPv6 routing on the VLAN.

Chapter 27. IPv6 Interface Configuration

ProSafe Managed Switch