a. Select Routing > IPv6 Multicast > IPv6 PIM > Global Configuration. A screen
similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
10.
Enable PIM-DM on interfaces 1/0/1 and 1/0/13.
a. Select Routing > IPv6 Multicast > IPv6 PIM > Interface Configuration. A screen
similar to the following displays.
b. Scroll down and select the Interface 1/0/1 and 1/0/13 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
MLD on Switch B
1.
Enable IP routing on the switch.
478 |
Chapter 30. MLD
ProSafe Managed Switch