Chapter 13 Igmp Snooping And Querier; Igmp Snooping - NETGEAR ProSafe GSM5212P Software Administration Manual

IGMP Snooping and Querier
13.
This chapter provides the following examples:
•

IGMP Snooping

• Show igmpsnooping
• Show mac-address-table igmpsnooping
• External Multicast Router
• Multicast Router Using VLAN
• IGMP Querier
• Enable IGMP Querier
• Show IGMP Querier Status
IGMP:
• Uses version 3 of IGMP.
• Includes snooping.
• Snooping can be enabled per VLAN.
IGMP Snooping
The following are examples of the commands used in the IGMP snooping feature.
CLI: Enable IGMP Snooping
The following example shows how to enable IGMP snooping.
(Netgear Switch) #config
(Netgear Switch) (Config)#set igmp
(Netgear Switch) (Config)# set igmp unknown-multicast filter
(Netgear Switch) (Config)#exit
on page 217
on page 219
on page 220
on page 221
on page 222
on page 225
on page 218
Chapter 13. IGMP Snooping and Querier
13
| 216