NETGEAR ProSafe GSM5212P Software Administration Manual page 468

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/15 check box.
c. In the IP Address Configuration Method field, enter Manual.
d. In the IP Address field, enter 10.200.1.1.
e. In the Subnet Mask field, enter 255.255.255.0.
f. In the Routing Mode field, select Enable.
g. Click Apply to save the settings.
5. Create a routing interface and assign 10.200.2.1/24 to it.
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/16 check box.
c. In the IP Address Configuration Method field, enter Manual.
d. In the IP Address field, enter 10.200.2.1.
e. In the Subnet Mask field, enter 255.255.255.0.
f. In the Routing Mode field, select Enable.
g. Click Apply to save the settings.
6. Redistribute the connected routes to RIP.
468 | Chapter 29. DHCP L2 Relay and L3 Relay
ProSafe Managed Switch