a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Scroll down select the Port 1/0/21 check box. Now 1/0/21 appears in the Interface
field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.168.5.2.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
3.
Configure 1/0/22 as a routing port and assign an IP address to it.
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the Port 1/0/22 check box. Now 1/0/22 appears in the Port
field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.168.6.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d.
Click Apply to save the settings.
4.
Enable RIP on interface 1/0/21.
418 |
Chapter 28. PIM
ProSafe Managed Switch