NETGEAR ProSafe GSM5212P Software Administration Manual page 116

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. After you click the Add button in step 3, a screen similar to the following displays.

b. Under Extended ACL Rule Configuration, enter the following information:

In the Rule ID (1 to 23) field, enter 22.

For Action, select the Permit radio button.

In the Protocol Type list, select UDP.

In the Source IP Address field, enter 192.168.77.0.

In the Source IP Mask field, enter 0.0.0.255.

In the Destination IP Address field, enter 192.178.77.0.

In the Destination IP Mask field, enter 0.0.0.255.

c. Click Apply to save the settings.

Apply ACL 101 to port 2.

a. Select Security > ACL > IP ACL > IP Binding Configuration. A screen similar to the

following displays.

b. Under IP Binding Configuration, enter the following information:

Chapter 10. ACLs

ProSafe Managed Switch