NETGEAR ProSafe GSM5212P Software Administration Manual page 231

ProSafe Managed Switch
2. Add port 9 into MVLAN 999 with tagged mode.
a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to
the following displays:
b. In the VLAN ID list, select 999.
c. Click Unit 1. The ports display.
d. Click the gray box under port 9 until T displays. The T specifies that the egress
packet is tagged for the ports.
e. Click Apply to save the settings.
f. Repeat steps from b to e, add port 0/1 to VLAN1 1001, add port 0/5 to VLAN2 1002,
and add port 0/7 to VLAN3 1003.
3. Enable MVR and multicast VLAN
a. Select Switching > MVR > Basic > MVR Configuration. A screen similar to the
following displays:
b. For MVR Running, select Enable.
c. In the MVR Multicast VLAN field, enter 999.
d. Click Apply.
Chapter 14. MVR (Multicast VLAN Registration) | 231