NETGEAR ProSafe GSM5212P Software Administration Manual page 462

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the 1/0/3 check box.
c. In the IP Address field, enter 10.100.1.1.
d. In the Subnet Mask field, enter 255.255.255.0.
e. In the Routing Mode field, select Enable.
f. Click Apply to save the settings.
3. Enable RIP on interface 1/0/3.
a. Select Routing > RIP >Advanced > Interface Configuration. A screen similar to the
following displays.
b. In the Interface field, select 1/0/3.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply to save the settings.
4. Set up the DHCP global configuration.
462 | Chapter 29. DHCP L2 Relay and L3 Relay
ProSafe Managed Switch