NETGEAR ProSafe GSM5212P Software Administration Manual page 277

ProSafe Managed Switch
2. Enable DHCP snooping in a VLAN.
(Netgear Switch) (Config)# ip dhcp snooping vlan 1
3. Configure the port through which the DHCP server is reached as trusted.
(Netgear Switch) (Config)# interface 1/0/1
(Netgear Switch) (Interface 1/0/1)# ip dhcp snooping trust
4. View the DHCP Snooping Binding table.
(GSM7328S) #show ip dhcp snooping binding
Total number of bindings:
MAC Address
-----------------
00:16:76:A7:88:CC
Web Interface: Configure DHCP Snooping
1. Enable DHCP snooping globally:
a. Select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays.
b. For DHCP Snooping Mode, select Enable.
c. Click Apply. A screen similar to the following displays:.
2. Enable DHCP snooping in a VLAN.
1
IP Address VLAN Interface
--------------- ----
192.168.10.89 1
Type Lease (Secs)
----------- ------- -----------
1/0/2 DYNAMIC
Chapter 15. Security Management
86400
| 277