NETGEAR ProSafe GSM5212P Software Administration Manual page 499

ProSafe Managed Switch
a. Select Routing > Multicast > DVMRP > Interface Configuration. A screen similar
to the following displays.
b. Scroll down select the Interface 1/0/1, 1/0/13, and 1/0/21 check boxes.
c. In the Interface Mode field, select 300.
d. Click Apply to save the settings.
DVMRP on Switch B
1. Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply.
2. Configure 1/0/13 as a routing port and assign and IP address to it.
Chapter 31. DVMRP | 499