ProSafe Managed Switch
a. Select System > Services > DHCP Server > DHCP Server Configuration. A screen
similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. In the IP Range From field, enter 10.200.1.1.
d. In the IP Range To field, enter 10.200.1.1.
e. Click Add.
5.
Exclude 10.200.2.1 from the DHCP pool.
a. Select System > Services > DHCP Server > DHCP Server Configuration. A screen
similar to the following displays:
b. In the IP Range From field, enter 10.200.2.1.
c. In the IP Range To field, enter 10.200.2.1.
d. Click Add.
6.
Create a DHCP pool named dhcp_server.
Chapter 29. DHCP L2 Relay and L3 Relay
| 463