NETGEAR ProSafe GSM5212P Software Administration Manual page 359

ProSafe Managed Switch
a. Select Routing > IPv6 > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the interface 1/0/9 check box. Now 1/0/9 appears in the
Interface field at the top.
c. Enter the following information:
• In the IPv6 Mode field, select Enable.
• In the Routing Mode field, select Enable.
d. Click Apply to apply the settings.
4. Configure prefix on interface 1/0/9.
a. Select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar to the
following displays.
b. Scroll down and select interface 1/0/9.
c. Enter the following information:
• In the IPv6 Prefix field, enter 2001:1::1.
• In the Prefix Length field, select 64.
d. Click Add to create IPv6 prefix to interface 1/0/9.
5. Enable DHCPv6 Server Configuration
Chapter 23. DHCPv6 Server | 359