NETGEAR ProSafe GSM5212P Software Administration Manual page 180

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

d. Click test_dept to configure this class.

e. Under Diffserv Class Configuration, enter the following information:

In the Source IP Address field, enter 172.16.30.0.

In the Source Mask field, enter 255.255.255.0.

f. Click Apply.

Create class development_dept.

a. Select QoS > DiffServ > Advanced > Class Configuration. A screen similar to the

following displays.

b. Enter the following information:

In the Class Name field, enter development_dept.

In the Class Type list, select All.

c. Click the Add to create a new class development_dept.

Chapter 12. DiffServ

ProSafe Managed Switch