NETGEAR ProSafe GSM5212P Software Administration Manual page 483

ProSafe Managed Switch
a. Select Routing > IPv6 Multicast > IPv6PIM > Global Configuration. A screen
similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
10. Enable PIM-DM on interfaces 1/0/21 and 1/0/24.
a. Select Routing > IPv6 Multicast > IPv6 PIM > Interface Configuration. A screen
similar to the following displays.
b. Under PIM Interface Configuration, scroll down select the Interface 1/0/21 and
1/0/24 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
11. Enable MLD on the switch.
Chapter 30. MLD | 483