NETGEAR ProSafe GSM5212P Software Administration Manual page 477

ProSafe Managed Switch
a. Select Routing > OSPFv3 > Advanced > Interface Configuration. A screen similar
to the following displays.
b. Scroll down and select the Interface 1/0/1 and 1/0/13 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-DM globally.
Chapter 30. MLD | 477