NETGEAR ProSafe GSM5212P Software Administration Manual page 474

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply.
2. Enable IPv6 unicast routing on the switch.
a. Select Routing > IPv6 > Basic > Global Configuration. A screen similar to the
following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply.
3. Configure 1/0/1 and 1/0/13 as a IPv6 routing ports.
a. Select Routing > IPv6 > Advanced > Interface Configuration. A screen similar to
the following displays.
474 | Chapter 30. MLD
ProSafe Managed Switch