NETGEAR ProSafe GSM5212P Software Administration Manual page 110

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to

the following displays.

b. Scroll down and select the Interface 1/0/4 check box. Now 1/0/4 appears in the

Interface field at the top.

c. Enter the following information:

In the IP Address field, enter 192.150.4.1.

In the Network Mask field, enter 255.255.0.0.

In the Administrative Mode field, select Enable.

d. Click Apply to save the settings.

Enable VRRP on port 1/0/4.

a. Select Routing > VRRP > Basic > VRRP Configuration. A screen similar to the

following displays.

b. Under Global Configuration, for Admin Mode, select the Enable radio button.

c. Enter the following information:

In the VRID (1 to 255) field, enter 20.

In the Interface field, select 1/0/4.

In the Priority (1 to 255), enter 254.

In the Primary IP Address field, enter 192.150.2.1.

In the Status list, select Active.

d. Click Add to save the settings.

Chapter 9. VRRP

ProSafe Managed Switch