NETGEAR ProSafe GSM5212P Software Administration Manual page 49

ProSafe Managed Switch
Web Interface: Create Two VLANs
1. Create VLAN 10 and VLAN20.
a. Select Switching > VLAN > Advanced > VLAN Configuration. A screen similar to
the following displays.
b. In the VLAN ID field, enter 10.
c. In the VLAN Name field, enter VLAN10.
d. In the VLAN Type list, select Static.
e. Click Add.
f. Select Switching > VLAN > Advanced > VLAN Configuration. A screen similar to
the following displays.
g. In the VLAN ID field, enter 20.
h. In the VLAN Name field, enter VLAN20.
i. In the VLAN Type list, select Static.
j. Click Add.
2. Add ports to the VLAN10 and VLAN20.
Chapter 5. VLAN Routing | 49