NETGEAR ProSafe GSM5212P Software Administration Manual page 125

ProSafe Managed Switch
a. Select Routing > Routing Table > Basic > Route Configuration. A screen similar to
the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
• In the Route Type list, select Static.
• In the Network Address field, enter 192.168.50.0.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Next Hop IP Address field, enter 192.168.200.2.
c. Click Add.
7. Create an ACL with ID 101.
a. Select Security > ACL > Advanced > IP ACL. A screen similar to the following
displays.
b. In the IP ACL Table, in the IP ACL ID field, enter 101.
c. Click Add.
8. Create an ACL with ID 102.
Chapter 10. ACLs | 125