NETGEAR ProSafe GSM5212P Software Administration Manual page 142

c. Click Add. The Extended ACL Rule Configuration screen displays.
d. Under Extended ACL Rule Configuration (100-199), enter the following information
and make the following selections:
• In the Rule ID field, enter 1.
• For Action mode, select the Permit radio button.
• In the Match Every field, select False.
• In the Protocol Type field, select IP.
e. Click Apply to save the settings.
11. Apply ACL 102 to port 24:
a. Select Security > ACL > Advanced > IP Binding Configuration. A screen similar to
the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
• In the ACL ID field, select 102.
142 | Chapter 10. ACLs
ProSafe Managed Switch