NETGEAR ProSafe GSM5212P Software Administration Manual page 50

a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the
following displays.
b. In the VLAN ID field, select 10.
c. Click the Unit 1. The ports display.
d. Click the gray boxes under ports 1 and 2 until T displays. The T specifies that the
egress packet is tagged for the port.
e. Click Apply.
f. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to
the following displays.
g. In the VLAN ID list, select 20.
h. Click Unit 1. The ports display.
i. Click the gray box under port 3 until T displays. The T specifies that the egress
packet is tagged for the port.
j. Click Apply.
3. Assign PVID to VLAN10 and VLAN20.
50 | Chapter 5. VLAN Routing
ProSafe Managed Switch