a. Select Routing > RIP > Advanced > Interface Configuration. A screen similar to
the following displays.
b. In the Interface field, select 1/0/10.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
5.
Enable RIP on interface 1/0/11.
a. Select Routing > RIP > Advanced > Interface Configuration. A screen similar to
the following displays.
b. In the Interface list, select 1/0/11.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6.
Enable multicast globally.
438 |
Chapter 28. PIM
ProSafe Managed Switch