NETGEAR ProSafe GSM5212P Software Administration Manual page 442

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to

the following displays.

b. Scroll down and select the Port 1/0/21 check box. Now 1/0/21 appears in the

Interface field at the top.

c. Enter the following information:

In the IP address, enter 192.168.5.2.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d. Click Apply to save the settings.

Configure 1/0/22 as a routing port and assign an IP address to it.

a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to

the following displays.

b. Scroll down and select the 1/0/22 check box. Now 1/0/22 appears in the Interface

field at the top.

c. Enter the following information:

In the IP Address field, enter 192.168.6.1.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d. Click Apply to save the settings.

Enable RIP on the interface 1/0/21.

Chapter 28. PIM

ProSafe Managed Switch