NETGEAR ProSafe GSM5212P Software Administration Manual page 486

Managed switch 9.0.2

Hide thumbs Also See for ProSafe GSM5212P:

Table of Contents

Web Interface: Configure MLD Snooping

Create VLAN 300.

a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the

following displays.

b. In the VLAN ID field, enter 300.

c. Click Add.

Assign all of the ports to VLAN 300.

a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the

following displays.

b. In the VLAN ID list, select 300.

c. Click Unit 1. The ports display.

d. Click the gray boxes under ports 1 and 24 until U displays. The U specifies that the

egress packet is untagged for the port.

e. Click Apply.

Assign PVID to ports 1/0/1 and 1/0/24.

Chapter 30. MLD

ProSafe Managed Switch