NETGEAR ProSafe GSM5212P Software Administration Manual page 129

ProSafe Managed Switch
c. Click Unit 1. The ports display.
d. Click the gray box under port 44. A check mark displays in the box.
e. Click Apply to save the settings.
12. Apply ACL 102 to port 44.
a. Select Security > ACL > Advanced > IP Binding Configuration. A screen similar to
the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
• In the ACL ID list, select 102.
• In the Sequence Number field, enter 2.
c. Click Unit 1. The ports display.
d. Click the gray box under port 44. A check mark displays in the box.
e. Click Apply to save the settings.
Configuring the GSM7342S Switch
1. Create VLAN 40 with IP address 192.168.40.1/24.
a. Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following
displays.
b. Enter the following information:
• In the Vlan ID field, enter 40.
Chapter 10. ACLs | 129