Commands Received Serially, Lun Not 0; Concurrent Command, Any Initiator, Lun Not 0; Concurrent Command, Different Initiator, Lun Is 0 - Tandberg Data SLR7-140 PROGRAMMER Manual

Scsi interface functional specification
Table of Contents

Advertisement

Tandberg Data
4.6.3.

Commands Received Serially, LUN Not 0

The Drive responds to the selection and a new command may
be transferred. If the command is an INQUIRY or REQUEST
SENSE command it
returned will however reflect an U
(see the INQUIRY and REQUEST SENSE command sections for
details). All other commands will be terminated immediately
with CHECK CONDITION status. The error code generated will
be U
LUN.
NSUPPORTED
4.6.4.
Concurrent Command, Same Initiator, LUN Is 0
The Drive will respond to the selection. If the Initiator
does not send an ABORT or a BUS DEVICE RESET message during
the same MESSAGE OUT phase as the IDENTIFY message, and
Incorrect Initiator Connection condition exists [2], [5].
When the Drive detects an Incorrect Initiator Connection
the
Drive
aborts
original
command
current command with CHECK CONDITION status. The error code
generated will be O
4.6.5.

Concurrent Command, Any Initiator, LUN Not 0

The Drive responds to the selection and a new command may
be transferred. If the command is an INQUIRY or REQUEST
SENSE command it
returned will however reflect an U
(see the INQUIRY and REQUEST SENSE command sections for
details). All other commands will be terminated immediately
with CHECK CONDITION status. The error code generated will
be U
LUN.
NSUPPORTED
4.6.6.

Concurrent Command, Different Initiator, LUN Is 0

The Drive will respond to the selection and the Initiator
may send a new command. If the command is one of the
following commands,
INQUIRY,
REQUEST SENSE,
TEST UNIT READY,
it
will
be
executed
command already executing in the Drive). All other commands
are terminated with a BUSY status.
4-11
Tandberg SLR Product Line SCSI Functional Specifications
will
be
executed.
the
command
already
that
disconnected)
VERLAPPED COMMANDS ATTEMPTED
will
be
executed.
as
normal
Commands
The
parameter
LUN condition
NSUPPORTED
executing
and
terminates
.
The
parameter
LUN condition
NSUPPORTED
(concurrently
with
data
(the
the
data
the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLR7-140 PROGRAMMER and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Slr7Slr50Slr60Slr75Slr100Slr140

Table of Contents