Vital Product Data; Table 9-3: Summary Of Supported Vpd - Tandberg Data SLR7-140 PROGRAMMER Manual

BYTE BIT 7
00 Peripheral Qualifier
01 Page Code = 00h
02 RESERVED
03 Page Length = 09h
04 Supported Page = 00h
05 Supported Page = 80h
06 Supported Page = 81h
07 Supported Page = 82h
08 Supported Page = C0h
09 Supported Page = C1h
10 Supported Page = C2h
11 Supported Page = C3h
12 Supported Page = C4h
Peripheral Qualifier
Peripheral Device
Type
Page Code
Page Length
Supported Page
Tandberg Data
9.3.2.

Vital Product Data

9.3.2.1. Summary of Supported Pages
6 5
Table 9-3: Summary of Supported VPD Pages
This field will
Unsupported LUN condition exists (if an IDENTIFY message
is received, the LUN field in the Command descriptor
block will be ignored and only the LUN field in the
IDENTIFY message will be evaluated.), this field will,
however, be set to 3.
This field is normally set to 1. When an Unsupported LUN
condition exists , this field will, however, be set to
1Fh.
This field will be set to the value of the Page Code
field in the Command Descriptor Block.
This field specifies
parameters that follow the Page Length field.
This is a list of the pages supported by the Drive.
9-6 Tandberg SLR Product Line SCSI Functional Specifications
4 3
Peripheral Device Type
normally be set
the length
Inquiry
2 1 0
to zero. When
in bytes of
an
the