Read-Write Error Recovery; Disconnect/Reconnect - Tandberg Data SLR7-140 PROGRAMMER Manual

Block Size
Tandberg Data
This field reports the currently configured fixed block
size. See the corresponding field in the MODE SELECT
command for details.
15.3.3. Read-Write Error Recovery Page Descriptor
See the MODE SELECT command for details on the current,
saved and default values of this page (Page Code 01h)
The PS bit will be set to one for this page.
The Changeable Values page will return the following
values:
Byte 00 : 81h
Byte 01 : 0Ah
Byte 02 : 01h
Byte 03 : FFh
Byte 04 : 00h
Byte 05 : 00h
Byte 06 : 00h
Byte 07 : 00h
Byte 08 : FFh
Byte 09 : 00h
Byte 10 : 00h
Byte 11 : 00h
15.3.4. Disconnect/Reconnect Page Descriptor
See the MODE SELECT command for details on the current,
saved and default values of this page (Page Code 02h)
The PS bit will be set to one for this page.
The Changeable Values page will return the following
values:
Byte 00 : 82h
Byte 01 : 0Eh
Byte 02 : FFh
Byte 03 : FFh
Byte 04 : 00h
Byte 05 : 00h
Byte 06 : 00h
Byte 07 : 00h
Byte 08 : 00h
Byte 09 : 00h
Byte 10 : FFh
Byte 11 : FFh
Byte 12 : 00h
Byte 13 : 00h
Byte 14 : 00h
Byte 15 : 00h
15-6 Tandberg SLR Product Line SCSI Functional Specifications
The DCR is changeable
Read Retry Count is changeable
The Write Retry Count is changeable
The Read Buffer Full Ratio is changeable
The Write Buffer Empty Ratio is changeable
The Maximum Burst Size is changeable
Mode Sense